Thursday, October 27, 2022

Kiln Update

Building a kiln presents its challenges, and many are not concerning the kiln itself. I have been the sole laborer for this entire project, with the exception of digging and filling the kiln pad with gravel, erecting the trusses, and pouring the cement for the chimney support. Thus, I have had to research and ask questions to knowledgeable people in order to come up with the best solution for a problem.

For me, one of the biggest has been figuring out how to access the peak of my kiln shed roof in order to carry the chimney through and work safely.  After securing a pair of ladder hooks, a set of Ultimate Ridgehooks, and a Chimney Bracket, I am now able to stack the chimney brick above the roof line. The next challenge will be flashing the chimney, but that will, hopefully, be an easier task.



Chimney Bracket in place, mounted on Ultimte Ridgehooks. Ladder on roof is positioned with ladder hooks.



Staging in place using 2" x 8" lumber, and 2" x 4s positioned and secured with Simpson Ties. This allows me to get to the other side of the chimney to work.



Brick as it is being stacked to come above the roof line. It will rise 3 feet above the roof peak. Angle iron bracing will be put in place along corners.

No comments:

Post a Comment